Attività

4 Wires Pulse Electric Fence
Products Introduction
Electric Fence is the most advanced perimeter alarm system which consists of electric fence
management software, management keyboard, electric fence host, fore-end accessories.
Usually, the host is installed outdoor, along the original perimeter fence (e.g. walls or fences)
to install, according to the signal transmission equipment send alarm signal to rear-end
control centre.
1.Electronic fence host using advanced “block-oriented, alarm supplemented” perimeter security concept, set “deterrence, blocking, alarm, security” in one machine.
2.Touch-net host supports unique touch net detection technology to enable electronic fences to realize alarm modes, such as touch net, short circuit, open circuit, shearing, tamper, etc.
3.Microprocessor control with high reliability, easy and convenient keyboard operation
4.Advanced Pulse High Voltage output function: Every line in the perimeter has electric shocks, making the perimeter electronic fence airtight. Strong barrier to form physical barriers, delay the invasion time, take the initiative for safety precautions.
Product Parameter
Power Supply802.3af (POE) DC12V/3A
Operating Environment-40锝?50鈩? Humidity: 鈮?5%
Communication WayRS485
Back-up BatteryDC12V/4.5AH Lead; Battery(Additional)
Shell MaterialABS
IP LevelIPV4
Alarm TypeShort,Break; Tamper; Outage; Fault; Communication Failure Output.
Peak High Voltage Output5KV锝?0KV(Adjustable)
Peak Low Voltage Output0.7kv-1.0kv(Adjustable)
Peak Pulse Current<10A
Pulse Duration鈮?.1s
Pulse Interval Time1s
Max Output Electric Quantity Per Pulse2.5mC
Max Output Energy Per Pulse鈮?.0J
System Power ConsumptionSingle Zone鈮?0W; Double Zone鈮?5w
Product Feature And Application
Production Details
ALEAN 4 zones pulse electric fence has security electronic fences, animal husbandry electronic fence and zoo electronic fence three types.This product AN-EF serial pulse electronic fence is a professional security electronic fence which was researched and developed and produced by our company independently.Electronic Fence is widely used in converting station, power plant, water works, factories, key industrial sites, mines and enterprises, villas warehouse, estates, , schools, airports, aqua farm stock farm, governmental agencies, cultural relics sites, military facilities, jails and so on which are with walls sites.
FAQ
1.Fault:After the host is connected to the fence, the host zone alarm will appear (the Fence light is on and the buzzer sounds)
Analysis:
1.Build fences and branches/iron fences/support poles together
2.The fence line is loose, and the positive and negative high voltage lines are wrongly connected.
3.The fence is disconnected
4.Host fault
Solution : turn on the host under high-voltage working condition and listen to the crackling sound of discharge. If there is, replace the fence with high-voltage insulated wire in the alarm zone. If it is normal, check the fence (1. Turn the multimeter to the on-off position to test the fence. Plugged out or short circuit between the positive and negative voltage lines 2. Open the host in the high-voltage zone and listen the sound ), otherwise the host is fault.
2.Fault:Relay output failure
Analysis : 1. Relay external module fault
2.The 12V port of the host is not connected to a battery but other power sources or loads
3. The host relay output fault
Solution: remove the peripherals connected to the host and use a multimeter to test again
3.Fault: The host does not work or no display
Analysis: Maybe the power supply of the host is too low or the host is burned out.
Solution : Determine whether the power supply of the host is normal. If the power supply is normal, the host may be burned out (the power supply voltage is too high or the host is struck by lightning)China Pulse Electric Fence factory
website:http://www.aleansecurity.com/perimeter-protection/pulse-electric-fence/